In other words, reflection is the bouncing back of light rays from the same medium’s surface. Reflection of light occurs when a ray of light returns to the same medium after striking the surface of another medium. When moving to a medium where the waves slow down, the wave direction reverses (Snell’s Law). It occurs when waves strike the surface at an angle other than the normal to the surface. Refraction is the change in the propagation direction of waves as they pass through a medium with a different speed. The angle of incidence is equal to the angle of reflection. Reflection occurs when a wave encounters a boundary between two media with different wave speeds, but the wave remains in the original medium rather than passing into the second medium. Light energy is incredible and has numerous applications. The incident ray and the reflected ray are the two types of lights that are typically involved in this. When light passes through a surface and undergoes some changes in appearance, as it does when it usually passes through a medium, this phenomenon is known as refraction. Reflection is simply the property of light that bounces back after striking a surface. There is a distinct difference between reflection and refraction, and it is critical to analyze both terms and understand their definitions. They also aid in the visibility of bodies in the universe because some bodies reflect light from the sun while others twinkle due to differences in the densities of layers of the atmosphere. To begin with, they are applicable to all types of waves, including light waves. However, there are some similarities between these two light phenomena. As demonstrated in the preceding discussion, refraction and reflection differ in a number of ways. Although the study of light dynamics can be perplexing at times, the refraction and reflection aspects of light are quite simple and have a wide range of applications. As the transmitted light enters the second medium, its direction of travel changes it is refracted. When light travelling through one transparent medium encounters a boundary with another transparent medium (e.g., air and glass), some of the light is reflected and some is transmitted into the second medium. When looking at an object through a microscope, the angle of refraction is the angle between your eyes and the microscope’s lens.The ability to see most illuminated surfaces from any position is due to diffuse reflection-rays reach the eyes after reflecting off every portion of the surface.When you are using a magnifying glass to look at an object, the angle of refraction is the angle between the lens of the magnifying glass and the object’s surface.When you are looking at an object through a glass window, the angle of refraction is the angle between your eyes and the surface of the glass.Examples Of Angle Of Refraction In Real-Life Situationsįollowing are a few examples of the Angle of Refraction This is why lenses are often angled so that the angle of refraction is large. For example, if the angle of refraction is large, more light will be bent than if the angle is small. The angle of refraction is important because it affects how much light is bent when it passes through a lens. Once you have the angle of Incidence, you can use the formula above to calculate the angle of refraction. This can be done by using a protractor to measure the angles. To find the angle of refraction, you first need to find the angle of Incidence. The formula for the angle of refraction is:Īngle of refraction = angle of Incidence – angle of diffraction The angle of refraction is the angle between a ray of light and the line perpendicular to the surface of a lens. When you are shining a flashlight into a dark room, the angle of incidence is the angle between the flashlight beam and the wall’s surface.When you are taking a photograph, the angle of Incidence is the angle between the camera lens and the photograph’s subject.When you are driving at night and you see headlights coming toward you, the angle of Incidence is the angle between your eyes and the headlights.Examples Of Angle Of Incidence In Real-Life Situationsįollowing are a few examples of the angle of Incidence in real life This is why mirrors are often angled so that the angle of Incidence is large. For example, if the angle of Incidence is large, then more light will be reflected than if the angle was small. The angle of incidence is essential because it affects how much light is reflected off a surface. The formula for the angle of Incidence is:
0 Comments
Finally, choose to store your new license on your computer or your iLok.While a physical iLok is not necessary to use the plugin, the creation of an iLok account is required for activation. MixMeister Fusion v7.7.0.1 Overview MixMeister Fusion set the standard for combining live DJ performance with the pinpoint precision of the best music production software. It is full offline installer standalone setup of MixMeister Fusion v7.7.0.1 Crack mac for 32/64. Note: Your software utilizes PACE/iLok security measures to assist with anti-piracy. MixMeister Fusion v7.7.0.1 Free Download Latest Version for Windows. Please follow the on-screen steps as needed. You may be required to enter your e-mail and/or create or login to an iLok account.To activate the full version of Mixmeister, enter the Activation Code that was emailed to you from the Upgrade Email Notification Utility.When Mixmeister opens, you may see a window similar to the example below, allowing you choose Activate, Try, or Quit.Make sure to restart your computer if prompted. Follow the on-screen instructions to install Mixmeister. Once the download is complete, double-click and run the installer file.Note: some over-protective web browsers may present a warning, or even block the download. Your activation code will turn the Demo into the full version of the software after installation. On the web page that opens, click to download the Demo version of your software.In the email you received, click the link to the download page for the software title.Instructions - a link to these instructions.Download Page - a link to the page where you'll download your software title. The email will list the following for each eligible title associated with your email address: MixMeister Express 7.7 is compatible with Mac and PC so no matter which system youre on (see system requirements on the right of this page), you can enjoy the worlds most intuitive music-mixing. Locate the email you received from the Upgrade Email Notification Utility. MixMeister Express 7.7 is a powerful tool that you can use to create a professional-sounding mix from your music files with a minimum of effort.All new license manager.Mixmeister Fusion 7. Version 7.7 includes breakthrough new features like an enhanced timeline, improved time-stretching and support for Mac OS X.
Even in to December 2022 food inflation continued to remain high, clocking in at 13.3%, which is higher than the reported data from November. According to research from Kantar, grocery shopping inflation increased to as much as 13.9% – the highest it’s been since 2008. Consider your own needs and budget accordingly! Food price rises in the UKĪt the time of writing and publishing, the Bank of England announced that its base rate is going up in light of the continued cost of living crisis. Given that inflation in the UK has only just recently risen again at the time of writing, it’s worth taking all these figures with a pinch of salt. It’s worth adding £10 or more to the total to head in a more accurate direction. However, these rates date up to spring 2021, so prior to the war in Ukraine and the associated spikes in prices that resulted. I’ve based this data on general information from the Office of National Statistics’ report on Family Spending in the UK. I’ve taken a look at some of the average figures relating to average grocery spending in the UK right now. Keep in mind that we all have different needs and wants – and that your family of three may not spend as much as next door’s family of six, and several pets! With news over the past few months to years about inflation hitting all-new highs, the average grocery bill in the UK is only likely to escalate.īefore looking into how you can cut the costs of what you spend on food and drink each month, it’s worth taking a look at what other people pay on average. This is a huge decrease from last year when we saw a rise of 12-15% each quarter.For many of us, there always comes a time for counting the pennies. These numbers reflect a 3% increase, averaging a rise every 3 months. Those who do not pursue thriftiness and use a more liberal approach to shopping could spend an average of $364.70 a week or $13.02 per person per day. This would assume using coupons and price comparison while shopping. *Please note they did remove the “thrifty plan” as of April 2023.īefore looking at the numbers, keep in mind what your family spends versus the average. A good way to figure out which plan is best for you is to look at your current food budget and compare it to the USDA recommendations.Īccording to the USDA website, the average cost for a family of four with two children under 11 is $244.80 weekly or $8.74 per person per day on a LOW COST (Up $0.50/per day since the last quarter). The USDA breaks down the cost of food at home into three categories: I will be curiously watching for those numbers as they come in. Now, this number will be increasing due to the rising cost of food this year. I did some research.Īccording to the U.S. Department of Agriculture, which publishes a monthly food plan that suggests how much money Americans should be spending on food, the average cost of food for a family of four is roughly $309.30 spending weekly moderately. Let’s dig in and find out what the average family of four spends on groceries. We factor it into the entertainment category of our budget.Īverage Household Cost of Food In The United States Each month, we go out twice and we mark it on the calendar to make sure we don’t go over. We consider it a treat and not a basic necessity. Keep in mind that our grocery budget does not include eating out at restaurants.Įating out is considered a treat for us. Using strategic shopping methods, I was bound and determined to make that happen. And of course, I became challenged with spending less than the average family of four. My thought is to learn more about how much is considered average spending for a family of four. “What is the average grocery bill for a family of four?” Staying within our family’s set grocery budget is essential. Getting carried away at the grocery store can happen fast if you are not careful. You see, food can be expensive and if you are not careful, you can easily splurge on a few items and blow your budget.Īn extra carton of ice cream and a few extra bags of chips can really weigh in on your budget. However, I have found some statistics and averages that may intrigue you. As food is such a personal, individualized thing that it’s hard to give advice about how to save money on it that applies to everyone. I know that must be important to you as well, otherwise, you would have not landed on this article. Saving money on food is important to my family. How Much Should I Be Spending on Groceries? This should be accomplished by having a caloric-dense diet with regular exercise. Lastly, if you wish to gain weight, you need to consume more calories than you burn. Keep in mind that leaner bodies need more calories than less lean bodies. If you wish to burn more calories over consuming fewer, you should increase your physical activity – you can consume more calories and still sustain weight loss as long as you eat fewer calories than calculated. Including calorie counter, body mass index bmi. If you wish to consume less throughout your day, you will want to eat 500-1,000 fewer calories per day than calculated, or as an alternative, eat 15-20% fewer calories than calculated. Online weight loss, dieting and healthy eating program, featuring diet plans to help you lose weight. Conversely, if you want to lose weight, this can be accomplished by consuming less calories or burning more calories. In order to maintain your current weight, you must consume the same number of calories as you burn. Using the calculator above will help you determine your specific daily caloric needs. Everyone requires different amounts of energy per day depending on their age, size, and activity levels. Welcome to FatSecret, the easiest to use calorie counter and most effective weight loss and dieting app on the market. Generally, a calorie refers to energy consumption through food and beverage consumption and the amount of energy usage spent through physical activity. Multiply these together with a scaling factor, and that's the estimate.A calorie is a unit of energy. An accurate BMR measurement requires that a persons. The BMR is measured under very restrictive circumstances while awake. Physical activity makes up 20 of expenditure and 10 is used for the digestion of food, also known as thermogenesis. Calories for runs are a function of speed (grade adjusted), weight, and moving time. For most people, upwards of 70 of total energy (calories) burned each day is due to upkeep. You can easily save the nutrition label by saving the provided embed code. To get calories calculations for runs, Strava requires that you enter your weight. Saving and Embedding the Nutrition Label.If you are having trouble getting your Strava Power to calculate, see How to Get Power Calculated on your Rides. Power can be estimated if you enter your weight and the weight of your bike, or you can use a power meter to get a more accurate measure of your power output. Why Because weight loss occurs when you create a calorie deficit. To get calorie calculations for rides, Strava uses your power output and a coefficient for human efficiency. Tracking calories is the foundation of every successful diet.Changes to settings in 3rd party accounts may not be reflected in Strava.Unlike Strava's own calculation, changes to your Strava weight and activity elevation will have no effect on Caloric total.We recommend contacting the 3rd party for specifics on what data they use to estimate Calories. There is a wide range of different algorithms and inputs that can be used to estimate Calories.All other activity types will not display calories unless the upload partner includes the data with the activity upload. At this time, Strava only performs a calorie calculation on a ride, run, walk, and hike activities. The best calorie counter apps make logging food and activity quick and easy and can give you insight into lifestyle habits, nutrient quality, meal timing. If no value is sent, or you record with the Strava mobile app, we use our own calculations. Strava shows Calories as they were provided to us by upload partners. Calorie calculations are only estimates and there are many different ways to calculate calories. Calories (or kcal) are a measure of the energy you've burned during your activity. You will never, ever be able to get the stink of this film out of your eyeholes. Christopher LLoyd also plays the same character he plays in everything he's ever been in. The film also contains what I consider to be Jeff Goldblum's best acting. Brilliant and insane character of the highest caliber. Lizardo attaches a homebrew electroshock apparatus (including the tongue electrode) to himself to bring back the memories of the time before his interaction with the beings of the 8th Dimension. In the scene my avatar is clipped from, Dr. You will, if like most, consider it to be both one of the worst, and one of the best films ever- depending on how you look at it. Surely you know the reference, or if not, throw away two hours of your life and write them off as spent poorly, and watch the movie. Emilio Lizardo, who has been possessed by a red 'lectroid from planet ten by way of the eighth dimension. interesting mix of products, and interesting at sales rates, too. I'm curious to hear if others have done similar store checks. What he DID know was that "that stuff really had sold" and several people per day were asking about Arduino. I wasn't really expecting anything from a mall Radio Shack employee ten days befor Christmas. The sales kid knew next to nothing about them, but I'm sure he was just holiday sales help. "Getting Started" component kits and booksĪnd shelfspace that DID have stuff that had sold out already. MakerShed Mintduino (this is cute- may get for my daughter, add a RBG LED, and let HER make the "color nightlight" she wants) This location previously had maybe one or two Parallax Stamp products at most. Since Arduino devices are now being carried by Radio Shack, I decided to stop into the local store in the shopping mall in Marlborough, MA and see what they actually had on the shelves. However, a 5000 lumen light may or may not be brighter than a 4700 lumen light, for example. Generally speaking, a 5000 lumen light will be brighter than, say, a 1000 lumen light. The Lumens, in this (and many cases) are irrelevant. Which light is brighter? The one that emits more Lux at the same distance from the light. When measured at 10′ from the truck, Manufacturer “B’s” light emits 150 lux., yet the manufacturer can only claim 800 Lumens. However, they use a much more efficient optic and power/heat-sink system so that the lights emit 95% of their rated Lumens. Manufacturer “B” uses 8 of the same LEDs in their light. The manufacturer claims 1000 lumens but at 10′ from the vehicle, the measured light on the ground is 100 lux. Also, they don’t have a great heatsink on the back so the lights dim 25% after they warm up. They put these in a light fixture but put them behind a thick, aggressive lens to “bend” the light down to the ground. Here’s an example Manufacturer “A” has a scene light that uses 10 x 100 Lumen LEDs (according to the LED manufacturer). Really, do we care how bright the light on the side of the truck is, as long as it emits the proper amount of working light on the ground? Full daylight is 10,000-25,000 lux, and direct sunlight can get up to 100,000 lux.Ĭlearly, the end goal of scene/work lighting is to light up a working surface. A dark overcast day would be about 100 lux. Your office is probably around 400-500 lux. How does that equate to real life? Roughly speaking, 1 lux is about the equivalent of twilight. You’ll note the photographer is not measuring right at the light itself, but rather where the light is hitting.Ī Lux is 1 lumen covering 1 square meter. You’ve probably seen a photographer with a handheld light meter, putting it beside a model’s face and triggering the flash to see how much light is being splashed on the subject? That photographer is measuring in Lux (they use a different scale, but essentially they are measuring Lux). Lux is a much more accurate and desirable measurement than Lumens. Lux is the metric version of an older term you’ve probably heard of foot-candles. Lux is the measurement of light on a surface. In the case of scene lights, however, pretty much no-one uses Candelas. They are quite common with warning (flashing) lights as that’s what SAE uses to measure a light. Very few, if any, manufacturers use Candelas for scene/work lights. Of course, whether they can tell the difference in intensity of the light on the ground is unknown. We have had customers buy a 5000 lumen light that is twice the price, thicker, heavier, with a worse warranty, than a 4700 lumen light, just because of that extra 300 lumens. So, everyone tends to use the “raw Lumens” method. Second, most manufacturers use this “raw” method so to have an actual Lumen measurement would mean your light is “dimmer” (on paper) than the competitors’. Why do manufacturers do this? First of all, because it’s easy – the manufacturer of the LED gives them the specifications for each LED so the manufacturer of the light simply adds them up and declares a “raw Lumens” number. So, in an extreme case, a 5000 lumen light can only really put out 2500 lumens. As the LEDs warm up, they can grow dimmer if the heat is not properly removed. If there are any optics to ‘bend’ the light in any direction, those can consume over 30% of the light. For example, even a clear lens can suck up over 10% of the light output. The difficulty with this measurement is that there are many factors to the brightness of an LED. If Cree (or whatever LED manufacturer) says that each LED emits 100 lumens, and the light manufacturer puts 10 of these LEDs in a fixture, then the manufacturer somewhat erroneously claims a 1000 Lumen output. Rather, they are going by the LED manufacturer’s specifications for the LEDs themselves. What this means is that they haven’t actually measured the light coming out of a fixture. I would suggest that this is the most misunderstood term in the scene/work lighting world. With LEDs, this gets a bit tricky because most manufacturers use what they call “ Raw Lumens“. Let’s start with Lumens because that is what most people (and companies) use when comparing various scene lights.Īs you can see (hopefully) from the diagram above, Lumens show the total amount of light put out from a light source.
Its final form has two stages to it, first starting off as an unsightly eyeless, mouthless thing that drips some sort of deadly liquid from where its eyes were. This can also change its face into a cannon that can shoot lasers or spiked balls. The second form changes its face, so it has two eyes and a constant cheeky grin on it. It also has two long spiked arms with circles on its palms resembling paws. In its first form, the Boss has a circular body, with one eye, cat ears, and fangs. This awoke a nearby spider, who quickly cut the web to drop the crystals on the Boss and crush it, putting it in the same position it was in when it was disguised in the Paradise Cutscene. Once the Boss reaches the top, it lets out a furious roar. Upon reaching the top, the larger cube tries to cut a spider web holding up multiple crystals. With the help of the birds, the player is carried to the top of the mine while avoiding the Boss's lasers. It lets out a roar of fury as it rapidly climbs the mine towards the player. The platform gives way and the crystals fall onto the cell containing the Boss, breaking it and allowing the Boss to break free. In the level, after the player and the larger cube rescue a group of three birds trapped in a cage, the cage falls and breaks onto a platform with large pink crystals underneath. Taking place after the events of "Long Live The New Fresh", the Boss is imprisoned within a circular cell after the player collects its piece of the tree. The Boss later appears in the credits, grabbing a pair of headphones and playing at a DJ stand, celebrating with his enemies, possibly ending his evil ways. Reunited and purified, the three triangles undo the damage wrought upon the land, restoring everything to normal. The triangles' power revives the player in an invincible new form (starting the song "Till It's Over") that can attack the final boss directly, destroying it and forcing it to relinquish the final triangle. The player's allies mourn, but the other two triangles react, prompting the large square to use them on the player's remains. The player tries to revive, only for the Boss to smash them into pieces. As the player climbs back up, the Boss absorbs the final triangle completely, rapidly mutating into a monstrous final form that destroys the player in the song "Annihilate". But, out of nowhere, the Boss appears and blows them off the tower. After an exciting battle during "Final Boss", the player seemingly triumphs once more, claiming the Boss's crown and the final triangle. With the help of their three allies, the player opens the way to the villain's tower, where the circle confronts them alongside its remaining minions. The player survives against the Big square's attacks until they are able to overcome the corruption, enabling the player to purify the second triangle. Infiltrating the factory, the player frees the helicopter that helps them travel deeper into the structure unfortunately, they are too late to stop the triangle from corrupting The large square with hands that has been seen throughout the game. After this, the sailboat is restored, allowing the player to head to the Volcano Area, formerly a mountain that was corrupted by one of the triangles.Īfter the player clears the Volcano Area, they ride the sailboat to the east, where the Boss has built a massive factory that uses another triangle to corrupt the remaining denizens of the land. Immediately after doing this, it swallows an odd residue leaking from one of the triangles formerly making up the tree, becoming its second form, and then resuming attacking the protagonist. After seeing the opportune chance, it slams the tree back in during the song "New Game", but upside down, thus creating a huge, red tower. Then they chase after the Big Square and the protagonist, corrupting the land and its inhabitants wherever it goes, before punching out the large white tree in the area. However, when they get close, they impale the triangle, and reveal themselves. The Boss later appears during the paradise cutscene, disguised as a tall, all gray, and possibly dead creature inside a cave, attracting the protagonist and the Big Square to revive it with a Triangle. The Boss first appears in "Long Live the New Fresh", after attempting to destroy The Player and accidentally hitting themselves with their own fists and disappearing. 32Gb or 128GB by EasyWorkflow Wed 10:43 pm Any thoughts ion spending the extra 150 for 128 GB drive Ipad will be used as a controller and also have a a number of different music apps. If some one is reading my review and if her/she is an Ableton user looking for mixer controller (not complete control) you came to the very right place. 1 2 Next EasyWorkflow Posts: 242 Joined: Sat 12:37 am Ipad Pro. Check out the latest Link-enabled products Build Link into your application Explore new possibilities in your own software add Link support. Then when the app directly assign all you knobs and faders directly from my Ableton and I can directly control necessary knob and mixing right away I opened it, I’m just so happy now. 721 subscribers Subscribe 13K views 2 years ago Ableton iPad DiViNCi I've been using Ableton Live 11 (I'm an early birds beta user) on the iPad Pro for about a year w/ Apple's. Model 15 Connect with more Link works with a growing number of iOS apps and desktop software, with or without Live. First time midi connecting is confusing me but not that much. I didn’t expect so much because if some interface look like old school or analog stuff it just happen to be trash. Then I found LK it is really messing, I don’t know it just me or I really got confuse. I first found Touchable which is really expensive for some one doesn’t need all the control. The new version of touchAble 3 brings easy plug and play USB connectivity and 42 new templates for Ableton Liveâs Instruments and FX. I thought that if I buy an iPad I could try some controller app. I have been using Ableton for 3 years and I really wanted a controller mixer all time because I some time had a recording duty. I just bought an iPad Air to read books and to twist some mobile music production stuffs. Works without additional server software on OS X "Tiger" and above.Īlso works on Windows XP, Vista, And 7 with solutions such as Tobias Erichsen's "rtpMIDI" driver. Other software which supports the Mackie Control protocol will work with the "Default Mode" It is support Logic Control and Mackie Control protocols. So you can enjoy the work without jerking or any delays. It seems like TouchAble Pro or TouchOSC would be best, but it seems like they may not be supported anymore, possibly since the update to iPadOS. I’m trying to find an app that I can use to launch clips/scenes for live performance. (iPad 3)ĭaw Control has nice and fast interface. 10 Posted by u/HDI-X13 2 years ago iPad controller for Live 10 Question Hello everyone. DAW Control is compatible with both MAC and Windows. noted: Ableton Sampler Apple Logic's EXS24 (included in Logic Pro Mac) Avid Pro Tool's Structure IK. DAW Control is a wireless DAW(Digital Audio Workstation) software controller, optimized for Apple Logic®, Ableton Live® and Pro Tools®.ĭAW Control is a wireless DAW(Digital Audio Workstation) software controller, especially optimized for Apple Logic® and Ableton Live®. “More than 30 Chinese cities had at least one 200-meter or taller building completed last year and more than 200 are in the pipeline for the next few years. “China’s determination to rapidly urbanise virtually commands that tall buildings are part of the equation,” said Daniel Safarik, China director for CTBUH. “For the ninth year running, the world’s second largest economy ranked No 1 in the world for having the largest number of new skyscrapers 200 meters or taller, according to a report by the US-based Council on Tall Buildings and Urban Habitat (CTBUH). Analysts cite two main reasons behind the trend the acceleration of China’s urbanisation and a desire to improve the national image with modern construction. The construction boom shows no sign of slowing down. With the rapid development of the economy, high-rises have shot up on land once occupied by bungalows and a so-called International Financial Centre or World Trade Centre can be found in every corner of the country. According to the South China Morning Post: in the early 2000s there were barely any high-rises in China.” by 2017, “seven of the 20 tallest buildings in the world are on mainland Chinese soil. The devastating 2008 Sichuan earthquake caused more than 69,000 deaths and the disaster ignited a storm of public controversy over poorly constructed school buildings – known as “tofu dregs” – which collapsed killing thousands of students.In 2016, a total of 128 skyscrapers over 200 meters tall were completed around the world: 84 of them were in China. Last May, a five-storey quarantine hotel in the south-eastern city of Quanzhou collapsed due to shoddy construction, killing 29. It is also home to the world’s fourth-tallest skyscraper, the 599-metre Ping An Finance Centre.īuilding collapses are not rare in China, where lax building standards and breakneck urbanisation lead to constructions being thrown up in haste. Many Chinese tech giants, including Tencent and Huawei, have chosen the city to host their headquarters. Shenzhen is a sprawling metropolis in southern China, close to Hong Kong, which has a booming homegrown tech manufacturing scene. The new guidelines for architects, urban planners and developers aimed to “highlight Chinese characteristics” and also banned tacky “copycat” buildings modelled after world landmarks.įive of the world’s tallest skyscrapers are located in China, including the world’s second-tallest building, the Shanghai Tower, which stands at 632 metres. It is the 18th tallest tower in Shenzhen, according to the Council on Tall Buildings and Urban Habitat skyscraper database.Ĭhinese authorities last year banned the construction of skyscrapers taller than 500 metres, adding to height restrictions already enforced in some cities such as Beijing. The building is named after the semiconductor and electronics manufacturer Shenzhen Electronics Group, whose offices are based in the complex. “SEG has been completely evacuated,” wrote one Weibo user in a caption to a video of hundreds of people milling about on a wide shopping street near the tower. The district said in another statement later on Tuesday that everyone inside had been safely evacuated and that no further movements of the building had been detected.Įxperts “found no safety abnormalities in the main structure and surrounding environment of the building”, and the interior and exterior components of the building appeared undamaged, the district said.īystander videos published by local media on Weibo showed the skyscraper shaking as hundreds of terrified pedestrians ran away outside. “After checking and analysing the data of various earthquake monitoring stations across the city, there was no earthquake in Shenzhen today,” the statement said. Officials are investigating what caused the tower in the city’s Futian district to wobble, according to a post on the Twitter-like Weibo platform. The building was closed by 2.40pm, according to local media reports.Ĭompleted in 2000, the tower is home to a major electronics market as well as various offices in the centre of one of China’s fastest-growing cities. Paul’s second goal held up as the game-winner. Paul recorded his first career playoff multi-goal game and the fifth of his career, regular season and playoffs combined. Nick Paul put the Bolts back in front a little over three minutes after scoring his second goal of the game at 16:32 of the second period for a 2-1 Lightning lead. Toronto tied the game 1-1 at 13:25 of the second period, Morgan Rielly scoring off a rush chance to level the score for the home team. The Lightning are 18-3 when scoring first in potential series-clinching games, including a 7-0 mark in Game 7s. Tampa Bay owns an all-time record of 12-1 when scoring first in games when facing elimination. Cal Foote also registered an assist for his second assist of the series and second of his playoff career. Colton posted all of his First Round points in four of the final five games of the series. Ross Colton tallied the primary assist on Paul’s game-opening goal for his second assist and fifth point of the series. Paul has scored seven goals in 28 games (regular season and playoffs) since coming over to the Lightning via trade on March 20. Paul became the first player in Lightning history to score his first career playoff goal in a Game 7. Paul’s game-opening goal was his first career playoff goal and third career playoff point. Tampa Bay struck first in Game 7, Nick Paul pushing home a rebound off an initial shot from the slot by Ross Colton to give the Lightning a 1-0 lead at 18:24 of the first period. Vasilevskiy is now 53-32 all-time for his postseason career. Vasilevskiy saw his NHL record streak of shutouts in clinching games stopped at five-consecutive games but has given up just one goal combined in his last six clinching games. Lightning netminder Andrei Vasilevskiy stopped 30-of-31 shots to finish 4-3 in the series. Tampa Bay head coach Jon Cooper improves to 4-2 all-time in Game 7s. The Bolts are 7-3 all-time in Game 7s, including a 3-2 mark in road Game 7s. The Lightning won consecutive games for the first time in the series after rallying from a 3-2 deficit to take Games 6 and 7 over the Leafs. Tampa Bay advance beyond the First Round for the ninth time in franchise history. The Lightning are in the Second Round of the playoffs for the third-consecutive season and the sixth time in Jon Cooper’s nine full seasons as head coach. Tampa Bay advanced to the Second Round of the 2022 Stanley Cup Playoffs after defeating Toronto 2-1 in Game 7 of a First Round series to take the series 4-games-to-3. The Tampa Bay Lightning provided the following notes after Saturday's Game 7 win over the Toronto Maple Leafs. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |